emergency LED traffic signal lights baton light

Emergency traffic warning lights police equipment led baton light flare traffic signal lights roadway powerful magnet

emergency LED traffic signal lights baton light

Emergency safety light/baton light/led baton road flare/recharge alarm light/traffic warning light with powerful magnet/police equipment/roadway warning light/traffic signal light/led signal light

BOLI-NEW PRODUCT

Emergency traffic warning lightspolice equipmentled baton light flaresafety recharger alarm lightroadway powerful magnet

Model number: BL-2088 

 Develop by NINGHAI BOLI ELECTRIC FACTORY --- the only manufacturer producing this product, patent number ZL 2010 3 0534147.1FOR RECHARGE SERIES -- charger one by one!

OPERATION

Press the ON/OFF BUTTON on each flare to rotate through the following 5 light patterns:

#1-Rotate

#2-Ouad Flash

#3-Alternating Blinks

#4-SOS Rescue (Morse Code)

#5-Steady on - high

#6-Off

emergency LED traffic signal lights baton light

Alternate Operation:

To turn off the flare without cycling through the 5 light patterns,press and hold the ON/OFF BUTTON for 2 seconds.One LEDSwill flash five times and then turn off.When ready to operate again,press the ON/OFF BUTTON and it will return to the last flash pattern that was selected before turning off.

POWER DURATION	RUN TIME
The battery will be fully charged with either charger within 8-10 hours.When fully charged you may expect these run times:
#1-Rotate	5hours
#2-Ouad Flash	10hours
#3-Alternating Blinks	3hours
#4-SOS Rescue (Morse Code)	10hours
#5-Steady on - high	4hours

Note:The stand-by charging feature allows flares to be kept plugged in when not in use without damage to the battery or unit.Ensures the flares will be charged and ready for use when needed.Flares will keep a full charge for 90 days.

Step of charging:1> Put the light on ground, back side is upturned.2> Take out the ellipse charger, put the charger onto the light as photo shows below, there has a + and mark on both of light and charger, face + to + and to -.  3> Connect the USB wire with the ellipse charger, now you can charger the light through the computer USB plug.4> If you want to charger the light through AC, please connect the AC charger.5> If you want to charger the light through CAR Plug, take out the AC charger and connect the CAR charger instead.*** When it is succeed charging, the light on ellipse charger is GREEN, and when it is full charger, the light on ellipse will turn RED.LI battery in recharge series capacity: 700mAH/3.7VAC charger: input voltage 100-240V, output voltage: 5.5V, out put electricity 450MACar charger: input voltage 12-24V, output voltage: 5.5V, output electricity 450MACharging time: battery can be fully charged within 2-3hours. 

emergency LED traffic signal lights baton light

Emergency safety light/baton light/led baton road flare/recharge alarm light/traffic warning light with powerful magnet/police equipment/roadway warning light/traffic signal light/led signal light

emergency LED traffic signal lights baton light